#8 Polished Stainless Steel Neck Screws with Inserts Standard

Description

Papaxe Custom Guitars
Polished Stainless Guitar Neck Inserts
Standard Set
* Uses existing neck plate or can be used with neck ferrules (not included)
* Brings new life to old necks with outstanding sustain
* Greatly improves neck joint stability and improves tuning
* Installs in minutes
* See my other listings for kits for contoured heels
included in kit are;
Set of 4 8 x 32 Polished Stainless Oval Head Phillips Screws 1 3/4 inch length
Set of 4 Zink Alloy threaded neck inserts
Installs with a hand drill, follow the existing screw hole in neck and drill a 15/64" pilot hole for the insert. Be sure to mark your drill with a piece of tape the depth you want to go so you don't drill to deep. install Zink inserts in pilot holes you have drilled with a 4mm hex key. Put neck with new inserts installed in body, place new stainless steel screws through body and neck plate aligning them with new inserts installed and tighten snug. Now you can remove your neck at any time and not worry about screws stripping or getting loose.
(15/64 drill and 4mm hex wrench not included. They can be purchased at any good hardware)